The ultimate all-in-one paint conditioner and rust preventative.

Endrust Auto Wash; is a Lanolin enriched, pH Neutral Auto Wash additive that will not only make your paintwork gleam but will guard against corrosion. A micro-fine layer of lanolin will be left behind in all areas where the water runs during washing. Unseen chips, cracks and crevices between body panels, mouldings and drip channels are breeding grounds for corrosion but with a fine layer of lanolin, rust won’t start.

Sizes: 500ml, 5L, 20L




SKU Ultragloss Category


Endrust Auto Wash;   is the absolute highest level in automotive cleaning technology. Its highly concentrated formula will not just clean the paintwork but will condition the topcoat so thoroughly that the surface will actually look better than with normal washing. With the inclusion of lanolin, the vehicle will shine deeper, longer and look better. Visible imperfections such as swirl marks are reduced, as well as providing the natural corrosion protection of lanolin. Formulated for mixed fleet operators, Endrust Auto Wash;  can be safely used on every vehicle from Prime Movers to passenger cars.

Endrust Auto Wash; is extremely concentrated. This new level of concentration offers a much greater amount of washes per litre than ever before.

Endrust Auto Wash; may be used in the traditional manner or dispensed via high-pressure sprayers, foaming guns or wash bay facilities. Endrust Auto Wash; is fully biodegradable and is suitable for use in wastewater recycling systems.


Additional information

Weight 0.500 kg
Dimensions 7 × 7 × 19 cm
Product Data

Typical pH: 7.0 to 7.5
Specific Gravity: .950
Appearance: Thick viscous liquid or gel
Non hazardous, non regulated
Packaging: Plastic Container
Sizes Available: 500ml & 20L

Directions for Use

FOR CARS, BIKES AND BOATS – Add 25ml per 5L bucket.
Simply add to water in a bucket and wash vehicle using soft sponge or applicator. Rinse with water before surface dries, then chamois dry.

FOR TRUCKS AND EQUIPMENT – Add 40ml per 5L bucket.
May be used with foaming gun, spray applicator or traditional sponge/cloth. Rinse with water before surface dries, then chamois dry.